HIGH OUTPUT AND HIGH PRECISION SEALS-QUALITY

Precision mandrel cutting machines for the production of aerosol and precision seals

We have developed our Metzner SR 85 especially for the production of high-precision flat profile gaskets and seals from molded or extruded hoses. The production principle is simple and very fast. It also delivers the best quality results with tolerances in the hundredths of a millimeter range.

An operator, who does not need to have any specific experience, pulls the cut-to-length hose pieces over the specially developed mandrels. The machine then automatically clamps the mandrels in the rotation axis. A knife carrier then moves along the hoses and produces the seals with the help of a circular or piercing knife. High-precision flat gaskets are cut wet on 7 mandrels at the same time, with size increments of 0.01 mm | 0.0004″. 

Size increments of 0.01 mm | 0.0004"

The Metzner SR 85 is therefore ideal for the production of high-precision seals, e.g. gasket manufacturers with high precision requirements, such as those used for the production of gaskets for aerosol packaging, heat seals, chemicals, petrol and gas gaskets.

  • Fast production of
    high-precision seals

  • Highest quality
    output with minimum tolerance

  • For the production of gaskets from tubes

Mass production of high-precision flat profile seals: Seals cut from molded or extruded tubes – e.g. seals for aerosol packaging, heat seals, chemical, gasoline and gas seals

Performance Data Metzner SR 85
Tube outer diameter max. 85 mm | 3.3″ (7 tubes) 
170 mm | 6.7″ (4 tubes)
Tube inner diameter max. 20 mm | 0.8″
Tube length max. 540 mm |1’9″
Distance between centers max. 650 mm | 2’2″ (+/- 5 mm | 0.2″)
Number of tubes 4 to 7
Cutting rate max. (at cutting length 5 mm | 0.2″) 4 x 100 cuts/min.
7 x 100 cuts/min.
Feeding 0.3 mm to 100 mm | 0.01″ to 3.94″
Size increments 0.01 mm | 0.0004″
Typical repeatable exactness
(depending on material; tolerance +/- 0.5 mm | 0.02″)
+/- 0.2%
Reverse motion speed 6 m/min. | 19’8″/min.
Tube rotation 600 – 3,500 r/min.
   
Technical Data  Metzner SR 85
Electrical connection  3~400 V; 50/60 Hz; 25 A or transformator
Dimensions (L x W xH) 2,800 mm x 1,320 mm x 1,900 mm | 9’2″ x 4’4″ x 6’2″
Weight 2,300 kg | 5,071 lbs